Installing Accessories - HP Vectra VL5 4 Supplementary Manual

2 PC Hardware Structure

Installing Accessories

Installing Accessories
Installing Main Memory
The HP Vectra VL 5/xx series 4 PC has three memory banks each comprising
two memory sockets. These banks are labelled A, B and C on the system
board.
A maximum of 128 MB main memory is supported.
When additional memory modules are installed, the following rules must be
applied:
1 Memory modules must be installed in pairs.
2 The two modules sharing a bank must be identical.
3 Different banks can contain memory module pairs of different sizes.
4 Install only 4 or 16 MB memory modules in bank C.
32