Saab R5 SOLID Short Instruction

R5 SOLID Operator Short Instruction
This quick user guide serves as a complement to the
standard manual with P/N: 7000 118-200 found on the
documentation CD. This guide is designed to give
immediate access to essential information when operating
the system on a daily basis.
Please visit our web-site for the latest news regarding this
and other ship borne products. Our web-site also contains
contact information to our dealers and service stations
world-wide and much more.
www.saabgroup.com/transpondertech
Saab TransponderTech AB
SYSTEM MODES
Important: The R5 SOLID can operate in two different
system modes, Class A mode (default) and
mode. Instruction only applicable to Inland AIS
installations will be in brown print.
Inland AIS is currently only applicable to European river
going vessels.
GENERAL OPERATION
SYSTEM NAVIGATION
Use the Arrow keys to navigate the system views. Press ENTER
open a view. Press Esc to go back. The Numerical keypad can also be
used for quick navigation.
CHANGING PARAMETERS
Many views contain parameters that can be edited. To edit a parameter,
select it by using the ARROW KEYPAD and press ENTER
BACKSPACE
editing or press ESC key undo changes. Select SAVE after editing to
save and exit the view.
Enter data in the following ways:
1. Numbers: Press the ALPHANUMERIC KEY that corresponds to
each digit. Some of the parameters are decimal numbers. The
OPT button can then be used to insert a decimal point.
2. Text: Press the ALPHANUMERIC KEY that corresponds to
each character. Press the key repeatedly to change character.
Press the key 1 twice for special characters. Press function key
OPT for Caps Lock setting.
3. Selection List: Use the ∧ ∨ keys to select between the
predefined values.
Inland
4. Selection List and numeric input:
In views like the AIS Message Send view it is possible to select
a target MMSI in a list of predefined values based on received
targets MMSI. It is also possible to enter any MMSI number. To
do this, simply input a numerical value with the
ALPHANUMERIC KEYS. Press ENTER
DO NOT DISCONNECT TRANSPONDER POWER WITHIN 2
SECONDS OF A PARAMETER CHANGE!
7000 118-202 A2

to delete characters. Press ENTER

to

. Press

to accept after

when done.