Seat Media System 1.0 Manual page 80

Hide thumbs Also See for Media System 1.0:
Table of Contents

Advertisement

To ...
delete a name tag from the
phone book for the speech
control system.
play back name tags from the
phone book of the speech con-
trol system.
delete name tags from the
phone book for the speech
control system.
During the dialogue, you can use the commands REPEAT, BACK, and
DELETE.
Entering a PIN
You can change the PIN code for the SIM card via the speech
control system.
– Switch on the speech control system ⇒ page 77.
– Give the command ENTER PIN.
– Say the individual digits of your PIN code.
– Say the command STORE.
If the PIN code is more than 8 digits long, the speech control system will
decline and give the cue The PIN is too long. If the specified PIN code is incor-
rect, the system will say The PIN is incorrect. If the wrong PIN code is entered
three times, the SIM card will be blocked. The SIM card can be unblocked with
Operating
RADIO, CD/MP3
Speak this command:
DELETE NAME ⇒ page 81, or
DELETE PHONE BOOK ⇒ page 82
PLAY PHONE BOOK ⇒ page 82
DELETE PHONE BOOK ⇒ page 82
TEL (telephone)
the PUK (personal unblocking key). The unblocking key can only be entered
on the mobile phone keypad and not via the speech control system.
Dialling a number
A telephone number can be specified to the system and then
dialled.
– Switch on the speech control system ⇒ page 77.
– Say the command DIAL NUMBER. The speech control system will
ask you to enter a telephone number.
– Say the digits of the telephone number individually or in groups.
After each block of digits you specify (separated by a brief pause)
the system will repeat the digits.
– Say DIAL when you have completed the number entry. The tele-
phone number will be dialled.
Redial
– Switch on the speech control system ⇒ page 77.
– Say the command REDIAL. The last telephone number you used
will be dialled.
NAV, INFO
Mobile phone system
79
SETUP

Advertisement

Table of Contents
loading

Table of Contents