Table of Contents
Advertisement
72
Mobile phone system
Selecting a phone number
– Press the
button
MODE
appears on the dash panel display.
Making a call
– Use the left thumbwheel
down through the phone book.
– Press the left thumbwheel. The number is dialled and the audio
system is muted automatically.
Answering and ending calls
– Press the left thumbwheel.
Rejecting a call
– Keep the left thumbwheel held down.
Replacing a call
– If a second call is received (call waiting), briefly press the left
thumbwheel. The current call will be ended and you will be
connected with the second caller.
The following telephone status messages appear on the display in the dash
panel:
Please wait...
The SIM card memory is being scanned.
SIM CARD
There is no SIM card in the mobile phone.
PIN CODE
The PIN code has not yet been entered.
NO SERVICE
No network connection
⇒ page 71, fig. 83
until a phone number
⇒ page 71, fig. 83
to scroll up and
CALL
A call is active or incoming. If the caller's telephone
number is available, the display will alternately
show the caller's number and the message CALL.
LINE ENGAGED
Number dialled is engaged.
TELEPHONE OFF
The telephone is switched off.
CALLING
The connection is being established.
NO ENTRIES
The phone book has no entries.
Phone numbers can be stored in different categories in the mobile phone
directory. These categories are displayed as follows:
P
Private phone number
W
Work phone number
M
Mobile phone number
Scroll the left thumbwheel downwards to scroll down the list of stored names
from A to Z. Scroll the left thumbwheel upwards to scroll up the list of stored
names from Z to A. If you "flick" the left thumbwheel you can jump to the next
letter of the alphabet.
Note
The information shown on the dash panel display depends on the type of
mobile phone used.
Advertisement
Table of Contents
