Table of Contents
Advertisement
12
Handling: General information
Mute
Fig. 13 Navigation system: Mute function symbol
Switching on the mute function
– Briefly press the MMI knob to enable the "Mute" function. The
volume for the enabled audio source will then be switched off.
Any activated media drives will be stopped.
Switching off the mute function
– Briefly press the MMI knob or:
– Rotate the MMI knob to disable the "Mute" function.
By briefly pressing the MMI knob, the sound of the currently enabled audio
source will be muted. Any activated media drives will be stopped ⇒ page 24.
When the mute function is enabled, the symbol
the bottom of the display. The sound is switched back on when the MMI knob
is pressed briefly or turned.
When the navigation system is switched on, the volume is automatically set
to the factory default value.
Fig. 12 Navigation
system: Mute
Note
If you activate the mute function during a traffic announcement or a naviga-
tion cue the current announcement will be cancelled.
Home function
Press the corresponding function button within a main function, the system
will automatically jump to the main menu of that main function.
In navigation, the "Home function" depends on the route guidance selected:
if you have activated route guidance with stopovers, go to the menu for route
planning by pressing the function button again
have activated route guidance without stopovers ⇒ page 102, go to the main
navigation menu (direct navigation) by pressing the function button again.
A
⇒ fig. 13
will appear in
1
⇒ page 102, fig.
113. If you
Advertisement
Table of Contents
