Connecting To A Dmp Display - Cisco 4400G Quick Start Manual

Plug one end of an ordinary Ethernet cable into the
Step 1
Ethernet 10/100 port on the back of the DMP chassis.
Plug the other end of the Ethernet cable into a network
Step 2
hub, network switch, or router that participates in a
DHCP network.
4

Connecting to a DMP Display

We recommend that you use a digital display, not analog. For
the type of digital display, we recommend LCD, not plasma.
Digital signage uses static images more often than it uses
full-motion video. Most often, content is web-based or
animated in Flash. The nature of these media types means that
some pixels are not updated frequently in digital signage. Given
that LCDs are less susceptible to burn-in than plasma displays
are, LCD displays are the superior choice for digital signage.
Even though image persistence is sometimes a problem on LCD
displays, it is almost always self-correcting and is unlikely to
occur if you follow manufacturer guidelines for managing your
displays correctly.
8