To attach an analog display to your DMP, we recommend that
you use the provided composite/RCA cable for both video
and audio.
On the back of your DMP chassis, do one of the
Step 1
following:
• If you will connect your DMP to a digital display
that has an HDMI interface, plug the male end of
the HDMI cable into the HDMI interface on
your DMP.
• If you will connect your DMP to one of the
recommended NEC display models that does
not have an HDMI interface (or a similar display
from another manufacturer), do all of
the following:
10
Plug the male end of the HDMI cable into the
–
HDMI interface on your DMP, then connect an
HDMI-to-DVI adapter to the other end of
the HDMI cable.
Plug the 3mm jack on the RCA audio cable
–
into the AUDIO interface on your DMP.