Installing Accessories; Installing Main Memory - HP Vectra VE5 2 Supplementary Manual

INSTALLING ACCESSORIES

INSTALLING MAIN MEMORY

The HP Vectra VE 5/xx series 2 PC has three memory banks each comprising two memory
sockets. These banks are labelled A, B and C on the system board.
A maximum of 128 MB main memory is supported.
When additional memory modules are installed, the following rules must be applied:
1 Memory modules must be installed in pairs .
2 The two modules sharing a bank must be identical .
3 Different banks can contain memory module pairs of different sizes.
4 Install only 4 or 16 MB memory modules in bank C.
The following tables suggest upgrade paths from the initial 8 or 16 MB main memory provided
as standard.
Bank A 4
4
Bank B 4
4
Bank C –
–
Total (MB) 16
Memory upgrade paths from initial 8 MB (2×4 MB) configuration
4 4 8 8
4 4 8 8
4 8 4 8
4 8 4 8
4 – 4 4
4 – 4 4
24 24 32 40
4 4 4 4
4 4 4 4
16 4 8 16
16 4 8 16
– 16 16 16
– 16 16 16
40 48 56 72
4 32 32 32
4 32 32 32
32 4 8 16
32 4 8 16
– 4 4 4
– 4 4 4
72 80 88 104