Table of Contents
Advertisement
If you selected RGB as the color space, select an option
Step 3
from the Color Component Order list to define the
order in which to store red, green, and blue data. This
definition is sometimes called the left-to-right additive
color model.
(Optional) Move any or all of the sliders to compensate
Step 4
for DMP display deficiencies in video (brightness,
contrast, or saturation) or audio (channel volume).
To confirm your selections and to implement them until
Step 5
you change them or until you restart your DMP,
click Apply.
To test if your selections are suitable ones for your
Step 6
DMP display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
To make your configuration changes permanent, even
Step 7
after you restart your DMP, do the following:
a. Select Administration > Save Configuration.
b. On the Save Configuration page, click Save.
22
Advertisement
Table of Contents
