Connecting To An Ac Socket - Cisco 4305G Quick Start Manual

• If you will connect your DMP to an analog display,
do all of the following:
Connect the other end of the cable (or cables) to the
Step 2
corresponding interface (or interfaces) on your
DMP display.
If the DMP display is not already turned on, turn it
Step 3
on now.
5

Connecting to an AC Socket

Warning Use only the supplied power adapter and plugs.
Plug the yellow jack on the RCA cable into the
–
CVBS interface on your DMP.
Plug the red jack on the RCA cable into the
–
AUDIO/RIGHT interface on your DMP.
Plug the white jack into the AUDIO/LEFT
–
interface on your DMP.
11