Recording From A Cd (Cds) - Sharp CP-XP120H Operation Manual

Recording to a cassette tape
CD-XP120H
ENGLISH
Before recording:
" When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
" SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
" The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
E-19
Recording can be operated in the TAPE 1 compartment. The TAPE
2 is for playback only.

! Recording from a CD (CDs)

You can record 3 CDs continuously.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the CD button and load the desired disc.
4
Press one of the 1 - 3 buttons on the remote control
to select the disc to be recorded first.
5
Press the button of TAPE
1, which also engages the
button.
CD playback and tape recording will start.
To stop recording:
Press the button of TAPE 1.
To perform programmed recording:
1 Press the CD button.
2 Programme discs and tracks. (See page 15.)
3 Press the button of TAPE 1, which also engages the
02/4/15 CD-XP120H(H)E2.fm
button.