•
Installation:
Installation of a breath shield (option)
o
1. Dismantle the upper glass brackets with a six-sided spanner Ø 2.5
2. Stick the black non-slip adhesive patches in the specified markings on the part of the bracket in
contact with the breath shield.
3.
Install the glass, the non-domed end should be positioned 120 km from the edge of the beam. In
the case of the "salad bar" option, centre the glass.
4. Tighten the upper brackets.
Upper glass brackets
•
Overhang adjustment
The unit's overhangs should be positioned as shown below.
The unit should be level.
*
Vauconsant SA, all rights reserved A635xx -rev0-ENG, 22/10/2010
Installation
USER MANUAL
- 4 -