Advertisement
Always take care to switch off the appliance with thermostat before cleaning. This unit is not
impermeable to water. Do not use a high pressure water jet to clean it inside or out.
Every day:
•
Metal surfaces:
Stainless steel should be cleaned with soapy warm water or a special product for high quality
metal surfaces. Never use abrasive sponges or etching agentsto avoid scratching the surface.
•
Glass (breath shield):
Clean using a high quality glass cleaning product and clean cloth. Never use abrasive sponges or
etching agentsto avoid scratching the surface.
Symptoms
Possible causes
No electricity supply
The generator
does not start
Thermostat
displays P1
Incorrect settings
Thermostat
switched on No
Cold COMP light
off
Thermostat
Incorrect settings
switched off No
Cold COMP light
Faulty connections
on
NB
Fuses should be replaced by the same type and same caliber fuses.
If you have not solved your problem, contact a professional refrigerating technician.
Vauconsant SA, all rights reserved A635xx -rev0-ENG, 22/10/2010
Cleaning
Diagnostic
Thermostat off
Faulty supply
Faulty probe
Defrosting time. To delete it, switch the thermostat off and
DEF light on
Remedies
Switch on the thermostat
Check the general circuit breaker
Check the fuse in the switch cabinet
Check tightening of the lugs and wires on all the internal
and external cabling of the switch cabinet
Replace the probe
Check settings of the thermostat.
back on again.
Check settings of the thermostat.
Check the generator's connections
USER MANUAL
- 7 -
Advertisement
