HP t5145 Hardware Reference Manual page 29

Hp t5145: hardware guide

Hide thumbs Also See for t5145:

Table of Contents

To use the HP Quick Release with a VESA-configured thin client:

Using four 10 mm screws included in the mounting device kit, attach one side of the HP Quick

Release to the thin client as shown in the following illustration.

Figure C-2

Connecting the HP Quick Release to the thin client

Using four screws included in the mounting device kit, attach the other side of the HP Quick Release

to the device to which you will mount the thin client. Make sure the release lever points upward.

Figure C-3

Connecting the HP Quick Release to another device

HP Quick Release

Table of Contents

T5540 T5630 T5545