Autozeroing (Autotar); Serial Port Working Mode Selection (Lpt) - PCE Health and Fitness LSM User Manual

20. Autozeroing (AUtOtAr)

21. Serial port working mode selection (LPt)

0.01g
MENU
AUtOtAr
T
AUt oFF
AUt on
T
AUT
0.00g
0.00g
MENU
LPt
T
LPt oFF
LPt on
T
0.00g
When AUtotAr function is activated, a
balance automatically keeps zero indication
if a pan is empty or if zero indication was
acquired by pressing →T← key.
To leave the function press MENU key, then
with →T← key chose AUtOtAr and AUt oFF.
Note: Autozeroing function is activated
automatically for 10 min. after switching-on
This function enables to select serial port
working mode.
When function is active, weighing result with
successive number is printed automatically
after putting and replacing weighed sample
(after result stabilisation).
In order to change working mode (to work
with a computer) press MENU key, then with
→T← key chose LPt and LPt oFF. Weighing
result is send only after pressing
result stabilisation
measurement number).
key and
(without successive
20