Permobil Comfort M2 Operation Manual page 9

Comfort Cushions - M2, Acta-Embrace, Curve Operation Manual
CLEANING AND DISINFECTING, CONTINUED
Foam Care Instructions
CAUTIONS:
- DO NOT machine wash or machine dry the foam.
- DO NOT submerge the foam in any liquid, including water.
- The foam should not be exposed to light for any extended
period of time. Light will cause discoloration of the foam.
Note: Discoloration will not affect the functional features. There
is no need to attempt to "clean" discoloration caused by light
exposure.
Cleaning foam components: To clean, moisten a cloth,
then wring to remove excess water. Wipe gently with the
cloth and a household detergent, then wipe again with
a clean, slightly damp cloth. Allow the foam to air dry
thoroughly before putting the cover on.
WARNING: Disinfectants are not effective on porous surfaces such as
foam. If the foam portion of the product becomes soiled or contaminated,
DO NOT use with multiple individuals. Replace soiled or contaminated
foam components.
Care Symbols
Wipe with a damp cloth.
40C
Machine wash warm.
Line dry.
Bleach
(1 part bleach: 8 parts water)
MAINTENANCE
Periodically, check components for wear and damage, and replace if
necessary. See "Troubleshooting".
Hand wash warm.
40C
Machine wash hot, normal,
60C
at the temperature shown.
Dry flat in the shade.
7
Do not machine
wash.
Tumble dry low.
Do not tumble dry.