Table of Contents
Advertisement
Quick Links
Electric Patio Heater – EH305
FEATURES:
• Attractive slender and modern design
• Easy to operate, plug in and go
• The ideal solution for extending the outdoor
entertaining season
• Can be used indoors as well
• Safe odourless infrared technology, no UV rays
and silent operation
• Efficient and economical operation with 100%
heat production within seconds
• Use where a low roof prevents the use of a gas
patio heater
• Ideal for use under verandahs and near work
benches
• Provides soft lighting that is both practical and
creates ambience
2 SET UP OPTIONS
Fix to a wall with the mounting bracket provided or
mount heater onto the stand
Important: Retain these instructions for future use
01973 12/05
Advertisement
Table of Contents
Related Manuals for Gasmate EH305
Summary of Contents for Gasmate EH305
- Page 1 Electric Patio Heater – EH305 FEATURES: • Attractive slender and modern design • Easy to operate, plug in and go • The ideal solution for extending the outdoor entertaining season • Can be used indoors as well • Safe odourless infrared technology, no UV rays and silent operation •...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS • Always arrange the Cord so that it cannot be pulled or tripped over. To reduce the risk of personal injury or damage to • DO NOT operate this Product immediately below an property, follow basic safety precautions when using electrical Socket Outlet. -
Page 3: Before First Use
BEFORE FIRST USE Unpack the Product • Carefully unpack the Product making sure you keep all the packing material until all the parts of the Product have been found and the Product has been used. We recommend keeping all the packing material in a safe place for re-use at any time you wish to repack the Product for shipping purposes. - Page 4 WALL MOUNTING ASSEMBLY INSTRUCTIONS Assembly of wall mount bracket to heater (Fig 1) 1. Assemble screw (6) and washer (10) through heater (1) and bracket (2) and securely tighten with washer (11) and nut (4). 2. Assemble screw (7) and washer (13) through heater (1) and bracket (2) and securely tighten with washer (12) and nut (5).
- Page 5 Stand Mounting Assembly (Fig 8) 1. Assemble 2 screws (5) and washers (4) through heater (1) and bent tube (6) and securely tighten with washers (3) and nuts (2). 2. Assemble lower tube (11) into base (12) and securely tighten with thumb screw (14) and washer (13).
-
Page 6: Care And Cleaning
OPERATING INSTRUCTIONS CARE & CLEANING 1. Always operate the Stand Mounted Heater on a dry, stable and level floor surface, well away from curtains, drapes and 1. After each use, make sure the Product is turned OFF and soft furnishings. DISCONNECTED from the Power Supply. - Page 7 Gasmate is a registered trademark of: Sitro Group Australia Pty Ltd www.sitro.com.au ® AberGas Ltd - Hamilton, N.Z www.abergas.co.nz...