Front Panel (Operation Mode); Front Panel (Edit Mode) - Lavry Savitr AD-24-200 Manual

FRONT PANEL (OPERATION MODE)

1. Enable lamp
EDIT mode: ON
OPERATION mode: OFF
2. Enable switch
A sustained press of this switch enables EDIT mode. The ENABLE lamp will turn ON when this change occurs.
3. M switch
This switch cycles through the illumination levels of the METER lamps.
4. S switch
This switch cycles through the illumination levels of the USER CONTROL SETTINGS groups.
5. Peak Refresh switch
The peak-hold function for the meter can be enabled or disabled by a sustained press of this switch until the
ENABLE lamp flashes once. When enabled; the peak-hold can be reset with a momentary press of this switch.

FRONT PANEL (EDIT MODE)

In EDIT mode, the user-controls are divided into 6 distinct sections, labeled MAIN, AUX, SOFT SAT, SPECIAL, GAIN, and
EDIT.
All User-Control lamps will display one of 4 states:
 OFF
 ON
 Long flash- Pressing Set will turn function On
 Short flash- Pressing Set will turn function Off
Conversion continues uninterrupted in EDIT mode.
Operation will only change to new settings after
the SET switch is pressed. This will be followed
by a brief mute of the output.
8