Lavry Savitr AD-24-200 Manual page 6

5. AUX DIGITAL OUTPUT
A. SYNC INPUT
 UP position:

DOWN position:
B. SYNC INPUT
This BNC input is use to lock the AUX output to an external clock source (Word Clock or AES).
The input is internally terminated by 75Ω.
If you are clocking the Main output from an External clock source and want the AUX output to sync to
the same source; connect a short BNC cable from the MAIN Word Clock output to the AUX Sync Input.
Set the AUX Sync Input format to WC, and use the front panel controls to set AUX to External.
C. OUTPUT FORMAT
 UP position: the AUX digital audio output signal is AES formatted.
 DOWN position: the AUX digital audio output signal is SPDIF formatted.
D. Digital Audio Output connector
This locking male XLR outputs the AUX digital audio signal.
section
switch
SYNC INPUT is set to receive WORD CLOCK.
SYNC INPUT is set to receive AES.
connector
switch
6