Table of Contents
Advertisement
SAMPLE RATE lamps
There are 6 lamps labeled with numbers 44.1, 88.2, 96, 176.4, and 192. These refer to sample rates in kHz.
Depending on clock mode, these lamps function differently.
INTERNAL clocking mode
ON: displays the active clock rate.
Long flash- Pressing Set will select this clock rate.
NARROW clocking mode
Narrow Lock Mode offers highest jitter rejection with External Sync.
SEARCHING function (Narrow)
Displays a repeating pattern of single flashing lamps, until a clock signal among the 6 rates
is found.
LOCKED (Narrow)
A single Sample Rate Lamp (ON): displays the locked rate.
WIDE LOCK clocking mode
Wide Lock Mode allows lock to non-standard Sample Rates.
SEARCHING function (WIDE)
Displays a repeating pattern of paired flashing lamps, until a clock signal between 32 and
200 kHz is found.
LOCKED (WIDE)
Paired lamps (ON) indicates the range of the locked frequency:
44.1
and
48
(ON) : 32-68kHz
88.2
and
96
(ON): 68-136kHz
176.4
and
192
(ON): 136-200kHz
10
Advertisement
Table of Contents
