Lavry Savitr AD-24-200 Manual page 5

2. ANALOG INPUT section
A. LEFT Input connector
B. RIGHT Input connector
These 2 locking female XLRs accept Balanced or Unbalanced analog audio signals.
The internal GAIN range: 0 dB to 7 dB
 To achieve Full-scale; balanced input range: 17-24 dBu
 To achieve Full-scale; unbalanced input range: 17-20 dBu
3. MAIN EXT SYNC INPUT
This section allows the user the option to synchronize the digital audio of the unit to an external clock source
with a sample frequency in the range of 32-200 kHz.
A. WORD CLOCK INPUT
This BNC input is internally terminated by 75Ω.
B. SOURCE toggle switch
 UP position: The unit can sync to the WORD CLOCK signal on the BNC.
 DOWN position: The unit can sync to the AES signal on the XLR.
C. AES INPUT
This locking female XLR enables sync to an AES digital audio signal.
4. MAIN OUTPUT section
A. WORD CLOCK OUTPUT
This BNC outputs a clock source signal.
B. OUTPUT FORMAT
Use this switch to set the digital audio OUTPUT FORMAT
 UP position : OUTPUT FORMAT = AES
 DOWN position : OUTPUT FORMAT = SPIDF
C. Digital Audio Output connector
This locking male XLR is the main digital audio output.
section
connector
connector
connector
switch
5