Operation And Programming - Orca UVpro V-LAB Operating Instruction

5. OPERATION AND PROGRAMMING

After plugging in the device plug, the V-LAB is in stand-by mode. Via programmable timer it can be
programmed in a daily or weekly rhythm or switched on manually.
orca GmbH
The start menu shows the device name, the time, the
operating status and the set intensity. The depicted
example shows a unit in manual mode (Man) with a
set intensity of 100% ventilation.
The background colour of the start menu indicates
the operating status and possible errors. Please find
the colour key in the figure below.
When the tubes are cold, the set reporting threshold
for errors of the tube monitoring exceeds. Due to this,
it is possible that the display colour is purple when
switching on the unit. As soon as the tubes reach the
operating temperature, the display turns green.
www.uvpro.de
Recirculating Air Disinfection System V-lab
Seite 17 von 28