Table of Contents
Advertisement
2. TECHNICAL DATA AND DESCRIPTION OF THE SYSTEM
Specifications
In conformity with requirements
Operating temperature [°C]
Suitable UVpro tube
Total UVC output [W
Measurements (L x H x T) [mm]
Tube replacement interval [h]
Life expectancy electronics
System description
The UVpro V-LAB Recirculating Air Disinfection System is suitable for the use in laboratories, patient rooms
and medical practices. The unit can be mounted on the wall and is able to disinfect rooms up to 60 m²
effectively. The sterilisation rate and air circulation rate can be regulated by continuously adjustable
ventilation.
The V-LAB (1) consists of a housing with operating element and display (2), side air outlets (3) with visual
protection (6) and two service covers (4).
UVC tubes (5) are mounted inside the aluminium irradiation chamber (8) and the two fans (7) are
places opposite. The powder-coated housing can be mounted in both ways, vertical and horizontal. By
means of four fixing points, the unit is attached to the rear panel (11). The centrally located operating
panel (2) can be accordingly adjusted within the unit on the retaining plate (9).
orca GmbH
Type
UVpro V-LAB
EMV, CE, IP51
Material
stainless steel: WN 1.4301 und WN 1.4305
0...+40
Input power [W]
92
Current flow [mA]
400
UVpro N 30-4
]
22
253,7 nm
Air volume [m
3
/h]
50...100
Noise emission [dB]
41...51
Hanging system
Hole pattern for wall mounting see 3.4 Positioning and dimensioning
850 x 402 x 144
Weight [kg]
13.1 kg
12,000
> 10 years
Supply voltage [V
]
220...240
AC
Cable length [m]
5
www.uvpro.de
(2x 31 W)
(adjustable)
(depending on fan performance)
(75 %
output performance)
±5 %
(50...60 Hz)
(with safety plug)
Recirculating Air Disinfection System V-lab
Technical changes reserved.
Seite 8 von 28
Advertisement
Table of Contents
