Orca UVpro V-LAB Operating Instruction page 11

Recirculating Air Disinfection System V-lab
The middle plate (10) covers the operating panel from the outside. In the irradiation chamber the
UVpro tubes (5) are screwed down to the fitting carrier with a union nut on one site and fixed through
holding eyelets on the other side.
Outside, on both ends of the unit, there are visual protections with a lamellar structure (6). The
irradiation chamber is mounted in a powder-coated protective housing. Both of the service covers (4)
are fixed through socket screws on the side of the housing. With mounting holes (11) on the reverse
side of the protective housing, the unit can be attached on the wall.
orca GmbH www.uvpro.de Seite 9 von 28