Page 2
Manual CAUTION: Safety Information Since the elevation of loads might involve some hazards, the manufacturer and operator should consider some precautious measures. The operation with the measuring device should never lead to hazardous situations. The person that is in-charge of the device and any operator must follow any national guidelines, e.g. accident prevention regulations, safety regulations, standard operation procedures and any other regulations that are relevant in terms of operation with the device.
Page 3
Manual Maintenance and Control Inspection prior to each operation with the device An inspection of the device must be performed prior to the initiation of the operation. The operator must check the following aspects: - There should be no visible deformation or damages, e.g. fractures. - All compartments and attaching parts should be complete and in a flawless condition (e.g.
Page 4
Manual Control elements of the scale - Turn scale on and off - Turn on the scale after it went into an automatic shut-down after 30 minutes. - Turns the scale off (important: this mode leads to higher power consumption (approx. 30 mA), therefore we recommend to use the red button at the back of the scale to turn off the scale) - Adjustment of resolution (0.10 or 0.05) - tare function...
Page 5
Automatic mode (“1”). Disposal Batteries may not be put in the household waste. They have to be given in the set up collection points. Please contact PCE Instruments if you have any questions concerning our products, service etc. WEEE.-Reg. –Nr.: DE69278128...
Need help?
Do you have a question about the PCE-CS 300 and is the answer not in the manual?
Questions and answers