Installing A Memory Module - HP Pavilion t112 Supplementary Manual

Warning:
Do not pull the memory
module out of the socket. Use the
retaining clips to eject the module.
26
HP Pavilion home PC

Installing a Memory Module

1 See "Removing a Memory Module" on
page 25.
2 Holding the new memory module by its edges
only, remove it from the antistatic packaging.
(Avoid touching the memory chips or the gold
contacts on the module.) The memory module
has one or two small notches on the lower
edge, which fit into raised bumps in the
memory socket.
3 Hold the memory module in alignment with the
socket, aligning the notches with the bumps.