Installing The 6-In-1 Memory Card Reader Or The Diskette (Floppy) Drive - HP Pavilion t112 Supplementary Manual

7 Remove the screw from each side of the drive
cage to remove the 6-In-1 memory card
reader.
Or
Remove the screw from each side of the drive
cage to remove the diskette drive.
8 Pull the drive out through the front of the
drive cage.
Installing the 6-In-1 Memory Card
Reader or the Diskette (Floppy)
Drive
1 See "Removing the 6-In-1 Memory Card
Reader or the Diskette (Floppy) Drive" on
page 13.
2 Slide the replacement drive into the drive cage
until the two screw holes on each side are
aligned.
Upgrading and Servicing the PC
15