Removing A Second Hard Drive - HP Pavilion t112 Supplementary Manual

Removing a Second Hard Drive

1 Remove the side panel. See page 4.
2 Remove the front panel. See page 7.
3 Gently lay the PC on its side.
4 See "Removing the Preinstalled Hard Drive" on
page 17.
Note:
You do not need to remove the preinstalled hard
drive from the bracket when installing a second
hard drive.
5 Remove the two screws on the hard drive
bracket (N).
6 Slide the bracket away from the bottom of the
chassis (O), and then pull it up and out of the
chassis.
7 Make a note of each cable attached to the
second hard drive before removing the cables.
Remove the IDE and power cables from the
back of the second hard drive.
8 Remove the four screws on the front of the
chassis to release the hard drive from the front
of the chassis (P). Pull the hard drive out of the
chassis.
O
Upgrading and Servicing the PC
N
P
23