Summary of Contents for OSP Home Furnishings BRAYDON BRY9948
Page 1
August, 2019 BRY9948 BRAYDON 3 SHELF STORAGE Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2
LIMITED WARRANTY OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase.
Page 3
PARTS (A) Top Shelf (1 PC) (B) Middle Shelf (1 PC) (C) Bottom Shelf (1 PC) (D) Frame (1 PC) HARDWARE LIST DRAWING DESCRIPTION QUANTITY Screw 6 PCS + 1 EXTRA Anti-Tip Kit 1 PC Phillips Screwdriver also needed for assembly (not provided).
Page 4
STEP 1 FULLY TIGHTEN ALL SCREWS (1) WITH PHILLIPS SCREWDRIVER (NOT PROVIDED). ANTI-TIP KIT INSTALLATION STEPS: Place in desired location. Carefully drill a ¼’’ pilot hole into wall, gently tap Anchor into pilot hole. Secure one Bracket to wall using one Long Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS SCREWDRIVER (not provided). Secure remaining Bracket to rear of shelf using one Short Screw, FULLY TIGHTEN SHORT SCREW USING PHILLIPS SCREWDRIVER (not provided).
Need help?
Do you have a question about the BRAYDON BRY9948 and is the answer not in the manual?
Questions and answers