Table of Contents
Advertisement
9. ATTACHING THE BOTTLE OPENER
Parts Required:
1
x
Bottle Opener (#13)
2
x
Screw (#B)
Installation:
•
Secure the bottle opener to the front of the grill using two screws on
the support brace.
10. INSTALLING THE SIDE SHELVES
Parts Required:
2
x
Side Shelf (#9)
4
x
Side Shelf Bracket (#10)
2
x
Side Shelf Handle (#12)
4
x
Screw (#A)
Screw (#B)
12 x
Side Shelf Tool Hook (#C)
8
x
Installation:
•
Assemble the two side shelves first, one at a time. Turn the side shelf
upside down. On the edge of the side shelf with four holes, install the
tool hooks into each hole along the edge. Tool hooks will secure to
the self-clinching nut that is pre-mounted on the inside. Next, remove
the two pre-installed screws from the side shelf handle. Align the side
shelf handle on the short edge of the side shelf with two holes, then
secure by hand-tightening the two screws back into the handle. Last,
secure two side shelf brackets (one left, one right) using two screws
(#B) on each. Note illustration 10A for proper part installation.
•
From underneath, secure one side shelf to a side panel of the main
barrel using two types of screws: one screw (#B) for side shelf bracket,
one screw for side shelf (#A) . Note illustration 10B for proper screw
placement. Repeat installation of second side shelf on other side.
NOTE: Do not tighten any screws completely until all screws have
been installed. Once all screws are installed, then tighten securely.
IMPORTANT: Avoid using the side shelves to move or lift the grill.
The weight of the unit may cause the side shelf to break, which is
not covered by warranty.
11. PLACING THE GREASE BUCKET
Parts Required:
Grease Bucket (#16)
1
x
Installation:
•
Place the grease bucket on the spout hook on the end of the main
barrel. Ensure it is level to avoid grease spills.
9
B
B
13
10A
12
10-1
B
B
9
10-2
B
BOTTOM VIEW
10B
B
11
C
C
C
C
A
16
11
Advertisement
Table of Contents
