Securing The Door Stopper, Door Magnet; Attaching The Cabinet Doors - Louisiana Grills LG800D Assembly And Operation Manual

5. SECURING THE DOOR STOPPER, DOOR MAGNET

Parts Required:
1 x Door Magnet (#14)
Door Stopper (#15)
1 x
Screw (#B)
2 x
Screw (#E)
2 x
Installation:
• Mount the door magnet using two screws (#B) to the main grill frame.
Ensure the raised magnet is facing the front of the cart.
Secure the door stopper to the bottom shelf using two screws (#E) ,
•
with the raised stop facing the back of the cart.

6. ATTACHING THE CABINET DOORS

Parts Required:
Cabinet Door (#20)
2 x
2 x Cabinet Door Handle (#21)
4 x Screw (#B)
Installation:
• Insert one screw into the cabinet door, so it protrudes to the front
of the cabinet door. Use a screwdriver to tighten the screw into the
cabinet door handle (from the rear). Repeat same steps for the other
side of the cabinet door handle. Note illustration 6A. Repeat full
installation for the second cabinet door.
• Take one cabinet door and align the edge with the hinge pins to the
outside edge of the front of the cart. Insert the bottom pin into the
pivot hole on the side of the bottom shelf, then push down on the
spring-loaded top pin, and lock into the hole on the main barrel brace.
Repeat same installation for other cabinet door. Note illustration 6B.
IMPORTANT: The cabinet doors should swing freely once installed, and
line up with the door stopper and door magnet. If unlevel, ensure the
top and bottom pins of the cabinet doors are inserted correctly.
5
14 + B
14 + E
6A
21
20
6B
20
20
B
B
9