10632
10633
WOOD PELLET GRILL & SMOKER
GRIL ET FUMOIR À GRANULES DE BOIS
PARRILLA Y AHUMADOR DE PELLETS DE MADERA
HOLZPELLET-GRILL UND SMOKER
GRIGLIA A PELLET DI LEGNO CON AFFUMICATORE
IMPORTANT: READ CAREFULLY, RETAIN FOR FUTURE REFERENCE.
MANUAL MUST BE READ BEFORE OPERATING!
IMPORTANT, PRENEZ CONNAISSANCE DE CE DOCUMENT ET
CONSERVEZ-LE POUR RÉFÉRENCE ULTÉRIEURE. VOUS DEVEZ
LIRE CE MANUEL AVANT D'UTILISER LE BARBECUE!
IMPORTANTE, LEER DETENIDAMENTE, CONSERVAR PARA
REFERENCIA FUTURA. LEA EL MANUAL ANTES DEL USO!
WICHTIG: AUFMERKSAM LESEN UND GUT AUFBEWAHREN BITTE UNBEDINGT
VOR GEBRAUCH DIE BEDIENUNGSANLEITUNG SORGFÄLTIG DURCHLESEN!
IMPORTANTE: LEGGERE ATTENTAMENTE E CONSERVARE PER
RIFERIMENTO FUTURO. LEGGERE IL MANUALE PRIMA DELL'USO.
FOR OUTDOOR AND HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.
RÉSERVÉ À L'USAGE EXTÉRIEUR ET RÉSIDENTIEL UNIQUEMENT. NON DESTINÉ À UN USAGE COMMERCIAL.
SOLO PARA USO DOMÉSTICO Y EN EL EXTERIOR. NO APTO PARA USO COMERCIAL.
BITTE NUR IM FREIEN UND PRIVAT NUTZEN. NICHT FÜR DIE GEWERBLICHE ANWENDUNG GEEIGNET.
SOLO PER USO DOMESTICO ED ESTERNO. NON PER USO COMMERCIALE.
L E G A C Y S E R I E S
LG0800FL
•
LG1200FL
OWNER'S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
HANDBUCH
MANUALE DELL'UTENTE
™
Need help?
Do you have a question about the FOUNDERS SERIES LEGACY Series and is the answer not in the manual?
Questions and answers
When I select the temperature button on the grill to change temp it flashes. It’s at 350. When I select the + or - the 350 disappears and nothing is displayed. I hit the temperature button again and nothing is displayed in the cook temp area? How do I adjust the temp? Founders 800
To adjust the temperature on the Louisiana Grills Founders Series Legacy 800 when the display is not showing the cook temperature:
1. Press the Temperature Button to enter cook temperature mode.
2. Use the (+) or (−) buttons to adjust the temperature in 5°F (or 3°C) increments.
3. Press the Temperature Button again to confirm the set temperature.
You can also switch between Celsius and Fahrenheit by pressing the Temperature Switch Button.
This answer is automatically generated