Konica Minolta FS-528 Installation Manual page 3

9. Remove the screw from the staple waste box.
10. Remove the screw from the locking material at
the back of the stacker, and pull out the stacker.
11. Remove the locking material at the back of the
stacker (1 screw).
12. Loosen the two rail-stopper fixing screws, and
pull out the stacker further.
Rail-stopper fixing screw
Locking
material
Staple waste
box screw
15VFIXE003SA
Locking material
15VFIXE004SA
Rail-stopper fixing screw
A10UIXC007CA
13. Remove staple-locking material/1 (7 screws).
staple-locking material/1
14. Remove staple-locking material/2 (2 screws).
15. Remove the two locking materials on the left side
of the stacker (2 screws each).
Locking materials
E-3
15VFIXE005SA
staple-locking material/2
15VFIXE006SA
15VFIXE007SA