Advertisement
3. Install the machine installation plate (lower) on
the lower left side of machine. (TP screw M4x6: 2
pcs.)
Main body installation plate (lower)
TP screws M4x6
4. Install the machine installation plate (upper) on
the upper left side of the machine. (TP screw
M4x14: 2 pcs.)
Note:
Use the screw holes engraved marking 920 to
install the screws and secure them tightly.
Main body installation plate (upper)
TP screws M4x14
5. Visually inspect the Finisher.
6. Remove the locking tapes and the locking protec-
tion materials from the front door and the left side
of the Finisher.
Locking tapes
A10UIXC002CA
7. Remove the locking tape from each guide plates.
8. Remove the stacker locking materials.
A10UIXC003CA
Three pieces
of locking
materials
E-2
Locking
protection
materials
Locking tape
Locking tapes
A10UIXC006CA
Locking tapes
15VFIXE002SA
Advertisement
