Download Print this page

Advertisement

Quick Links

Zigbee Remote PSR05
The Remote PSR05 is a simple control can controls 8 groups scene,
based on Zigbee technology.
It is the Zigbee product, it support the security, OTA... Those newest
features of the Zigbee technology. Zigbee is a wireless communication
protocol designed for home automation, specifically to remotely control
applications in residential and light commercial environments. The
technology uses a low-power RF radio embedded or retrofitted into
home electronics devices and systems, such as lighting, home access
control, entertainment systems and household appliances.
CAUTION
– replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas;
– a battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas
The marking information is located at the bottom of the apparatus.
Specification
Rated
Charger Voltage
RF distance
Frequency Range
RF Maximum Power
Location
Operation temperature
Humidity
Dimension
 Specifications
are
improvement without notice.
DC3.7V Lithium rechargeable
battery
5Vdc from Micro USB
Min. 40M indoor,
100M outdoor line of sight,
2405MHz~2480MHz
+5dBm
Indoor use only
-10 to 45° C
95% RH max
110(L) x 110(W) x 19(H) mm
subject
to
change
and

Advertisement

loading

Summary of Contents for ZIGBEE PSR05

  • Page 1 RF distance 100M outdoor line of sight, Frequency Range 2405MHz~2480MHz RF Maximum Power +5dBm The Remote PSR05 is a simple control can controls 8 groups scene, Location Indoor use only based on Zigbee technology. Operation temperature -10 to 45° C...
  • Page 2: Troubleshooting

    Troubleshooting Overview Symptom Cause of Failure Recommendation The device can not The device may in a Reset the device join to Zigbee Zigbee network. then include again. network For Instruction to http:// www.philio-tech.com...
  • Page 3 Zigbee network. Function Control In the first time, add the device into the Zigbee network. First, make sure the primary controller is in the inclusion mode. And then power on PSR05 has five keys on the device. The central one has group-button the device, just take out the insulation Mylar in the back side of the switching and special function, the others are control keys.
  • Page 4: Over The Air (Ota) Firmware Update

    AlarmCluster : 0x0001 Over The Air (OTA) Firmware Update AlarmCode : 0x01 The device support the Zigbee firmware update via OTA. Before starting the procedure, please remove the front cover of the device. Otherwise the hardware check will be failed.
  • Page 5: Fcc Interference Statement

    that to which the receiver is connected. Disposal Consult the dealer or an experienced radio/TV technician for • This marking indicates that this product should not be help. disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human This device complies with Part 15 of the FCC Rules.
  • Page 6 「取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立 即停用,並改善至無干擾時方得繼續使用。 前述合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾。」...