Download Print this page

Advertisement

Quick Links

Package Contents
One Switch
One Power Cord
This Installation Guide
Two mounting brackets, eight
screws and four rubber feet
Safety Precautions
To avoid any device damage and bodily injury caused by improper use,
you should observe the following rules.
Safety Precautions
1. Keep the power off during the installation.
2. Wear an ESD-preventive wrist strap, and make sure that the wrist
strap has a good skin contact and is well grounded.
3. Use only the power cord provided with the switch.
4. Make sure that the supply voltage matches the specifications
indicated on the rear panel of the switch.
5. Ensure that the switch is installed in a well-ventilated environment
and its ventilation hole is not blocked.
6. Do not open or remove the cover of the switch.
7. Before cleaning the device, cut off the power supply. Do not clean it
by the waterish cloth, and never use any other liquid cleaning method.
8. Place the device with its bottom surface downward.
CE Mark Warning
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
EU declaration of conformity
Cudy hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at
http://www.cudytech.com/ce.
Safety Information
1. Keep the device away from water, fire, humidity or hot environ-
ments.
2. Do not attempt to disassemble, repair, or modify the device.
3. Place the device with its bottom surface downward.
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
www.cudytech.com
Support@cudytech.com
Company: Shenzhen Cudy Technology Co., Ltd
Quick Installation Guide
Model: GS1016/GS1024
810600047

Advertisement

loading
Need help?

Need help?

Do you have a question about the GS1016 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cudy GS1016

  • Page 1 This Installation Guide Two mounting brackets, eight screws and four rubber feet Cudy hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.cudytech.com/ce.
  • Page 2 Front Panel Desktop Installation Model GS1016 / GS1024 provided) to secure the brackets to the rack, as illustrated in the following The front panel of GS1016 is shown as the following figure. figure. IEEE 802.3、IEEE 802.3u、IEEE802.3ab、 Standards IEEE802.3x、IEEE802.3az Figure 1-1...

This manual is also suitable for:

Gs1024