Download Print this page

Sony SELP1650 Service Manual page 6

Interchangeable lens
Hide thumbs Also See for SELP1650:

Advertisement

Ver. 1.2 2013.04
2-1. DISASSEMBLY
Note 1: Notes for Removing the Outer Barrel Assy.
When the Outer Barrel Assy is removed, the Optical Unit may be disassembled.
To prevent the Optical Unit from being disassembled, be sure to follow
the procedure below for removing the Outer Barrel Assy.
1) Remove the Operation Barrel Assy first referring to Note 2.
2) Remove the four screws of the Outer Barrel Assy with the Optical Unit set
at the WIDE end.
3) Remove the Outer Barrel Assy while maintaining the WIDE end state of
the Optical Unit.
Optical Unit
Operation Barrel
Assy
Be sure to maintain the WIDE end state.
1
HELP01
Operation Barrel Assy
(Note 1, 2)
Front Cover
SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
HELP05
2
1
3
Outer Barrel
Assy
3 Group Block Assy
2 Group Block Assy
1 Group Block Assy
1st Moving Frame
1st Holding Springs
B-60
HELP06
1st Lens Assy
1st Light Shield Ring
HELP03
1st Front Plate
qg
qf
9
8
Motor Geared Block
Outer Barrel Block
qd
Outer Barrel Assy
Stationary Barrel
Zoom Cam Barrel
qa
HELP02
qh
qj
MF- PR Hold Plate
(Note 3)
qk
HELP02
Note 2: Removing the Operation Barrel Assy
1) Insert a lens jig (Chip B) into arbitrary two holes out of three holes of the Operation Barrel Assy.
2) Turn the outside of the Operation Barrel Assy to find the position where the tip of Chip B can be fully
inserted, and check that the outside and the inside of the Operation Barrel Assy turn simultaneously.
3) Turn the outside and the inside of the Operation Barrel Assy counterclockwise until you feel a click
and remove the Operation Barrel Assy.
Operation Barrel
2-2
REPAIR PARTS LIST
Mount Block Assy
Rear Light Shield Barrel
BL Contact Box Assy
Mount
Stopper Screw
Adhesive bond
(LOCTITE 460) or
the equivalent.
Z-PI Holder
2
5
3
4
7
1
Gom Bushes B (9109)
Note 3: Detaching the MF-PR Hold Plate
CL-1004 Board
6
Push the long claw of the MF-PR Hold Plate in the
Gom Bush B (9109)
direction of arrow inside the Outer Barrel Assy to
detach the MF-PR Hold Plate.
Switch Assy
MF-PR Hold Plate
qs
Short thick claw
q;
HELP04
Assy
Outside
Inside
Long thin claw
Hole
Operation Barrel
Assy

Advertisement

loading