Advertisement
4. Click the [Connect] button and check that the connection status becomes "Connect".
Method for Finishing the E-Mount Lens Adjustment
Finishing Procedure
1. Click the [Disconnect] button and check that the connection status becomes "Disconnect".
2. Click the [×] button on the upper right of the main window to finish.
3. Turn off the power of camera.
SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
4-6-4. Adjustment Method of Each Item
Method of Adjustment
1. Click the button for corresponding adjustment item in the Adjustment and Inspection.
Adjustment Method of "Flange Back (S)"
About "Flange Back (S)" item, the operation of lens side is required.
Note: Be sure to move the zoom to TELE end and start the adjustments.
When operating the lens, hold a camera body by hand firmly so that the lens does not move, and then operate it.
At this time, never touch the focus ring.
1. The pop-up window appears, then press the ENTER key if the preparation for adjustment is complete.
Note: During adjustments, do not touch the focus ring.
2. An automatic zooming is begun, and then the screen shown in "FB ADJUSTMENT OK" appears when the adjustment is complete.
3. Recording the adjustment data and releasing the adjustment mode are performed automatically by pushing the ENTER key. After processing,
"FINISHED" is displayed.
4-14E
Advertisement
