Advertisement
Ver. 1.6 2017.03
3. REPAIR PARTS LIST
The changed portions from
Ver. 1.5 are shown in blue.
NOTE:
• -XX and -X mean standardized parts, so they may
have some difference from the original one.
• Items marked "*" are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
• The mechanical parts with no reference number in
the exploded views are not supplied.
3-1. EXPLODED VIEWS
ns: not supplied
30
24
28
(Note 1, 2, 4)
27
22
ns
21
ns
4
18
(Note 1, 2)
3
(Note 3)
2
SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
15
1
14
12
17
11
10
17
12
16
13
12
16
5
ns
(Note 1, 2)
5
5
26
(Note 4)
29
ns
23
(Note 4)
19
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
Ref. No.
Part No.
1
A-1906-355-B
1
A-1906-399-B
2
X-2584-679-1
3
4-426-830-01
3
4-426-830-11
3
4-579-734-01
3
4-579-734-11
4
4-426-795-01
5
4-300-115-11
6
A-1899-285-A
6
A-1897-556-A
7
1-855-248-11
8
4-300-106-01
9
3-254-135-01
10
4-298-699-01
11
4-430-576-01
12
4-298-700-01
13
X-2585-594-1
14
4-426-840-01
15
4-159-701-01
9
Note 1: Notes for Removing the Outer Barrel Assy.
20
ns
When the Outer Barrel Assy is removed, the Optical Unit may be disassembled.
8
To prevent the Optical Unit from being disassembled, be sure to follow
the procedure below for removing the Outer Barrel Assy.
1) Remove the Operation Barrel Assy first referring to (Note 2).
25
2) Remove the four screws of the Outer Barrel Assy with the Optical Unit set
at the WIDE end.
25
7
3) Remove the Outer Barrel Assy while maintaining the WIDE end state of
the Optical Unit.
6
Operation Barrel
Assy
1
Note 2: Removing the Operation Barrel Assy
1) Insert a lens jig (Chip B) into arbitrary two holes out of three holes of the Operation Barrel Assy.
2) Turn the outside of the Operation Barrel Assy to find the position where the tip of Chip B can be fully
inserted, and check that the outside and the inside of the Operation Barrel Assy turn simultaneously.
3) Turn the outside and the inside of the Operation Barrel Assy counterclockwise until you feel a click
and remove the Operation Barrel Assy.
Operation Barrel
Assy
3-1
Description
Ref. No.
Part No.
16
OPTICAL BLOCK FOR SERVICE (C) (BLACK)
17
OPTICAL BLOCK FOR SERVICE (D) (SILVER)
18
FRONT U_ASSY(D40.5)
18
FRONT COVER (BLACK) (Note 3)
19
FRONT COVER (SILVER) (Note 3)
19
FRONT COVER (BLACK) (Note 3)
20
FRONT COVER (SILVER) (Note 3)
21
1ST FRONT PLATE
22
TAPPING (1.7) (CH)
23
SWITCH ASSY(SI) (SILVER)
24
SWITCH ASSY (BLACK)
24
MOTOR GEARED BLOCK (9109)
25
BTITE (1.4 (CH))
26
SCREW (B1.4)
27
STOPPER SCREW (CH)
27
MOUNT (EN)
28
SCREW, TAPPING B2 (CH)
29
BOX ASSY, BL CONTACT
30
REAR LIGHT SHIELD BARREL
30
REAR LENS CAP
HELP05
2
Optical Unit
1
3
Outer Barrel
Assy
Be sure to maintain the WIDE end state.
Outside
Inside
Hole
Operation Barrel
Description
4-300-118-01
SCREW (P1.4) (CH)
4-299-469-01
SCREW M1.4 (CH)
X-2585-593-1
OPERATION BARREL ASSY (BLACK) (Note 1, 2)
X-2585-673-1
OPERATION BARREL ASSY (SI) (SILVER) (Note 1, 2)
A-1897-555-A
OUTER BARREL ASSY (BLACK)
A-1899-284-A
OUTER BARREL ASSY (SI) (SILVER)
A-1897-560-A
CL-1004 BOARD, COMPLETE
4-426-793-02
1ST LIGHT SHIELD RING
X-2585-586-1
1ST LENS ASSY
4-594-306-01
STATIONARY BARREL (Note 4)
A-1897-552-B
1 GROUP BLOCK ASSY (BLACK) (Note 1, 2, 4)
A-1899-283-B
1 GROUP BLOCK ASSY (SI) (SILVER) (Note 1, 2, 4)
4-467-198-01
GOM BUSH B (9109)
4-594-483-01
ZOOM CAM BARREL (Note 4)
4-426-794-21
1ST MOVING FRAME (BLACK) (Note 4)
4-426-794-31
1ST MOVING FRAME (SILVER) (Note 4)
A-1897-553-A
2 GROUP BLOCK ASSY
A-1897-554-A
3 GROUP BLOCK ASSY
9-913-202-35
STATIONARY BARREL ASSY (BLACK)
9-913-202-36
STATIONARY BARREL ASSY (SILVER)
Assy
Advertisement
