Table of Contents
Advertisement
Chapter 8
HCA Utilities and Diagnostics
tvflash Utility
This section describes the tvflash utility and includes the following topics:
•
•
The firmware upgrade is handled automatically by the installation script. You should not have to upgrade
Note
the firmware manually. For more information about the installation script, see
Host Drivers."
Viewing Card Type and Firmware Version
To display the type of HCA in your host and the firmware that it runs, perform the following steps:
Log in to your host.
Step 1
Enter the tvflash command with the -i flag.
Step 2
The following example shows how to enter the tvflash command with the -i flag:
host1# /usr/local/topspin/sbin/tvflash -i
HCA #0: MT25208 Tavor Compat, Lion Cub, revision A0
Primary image is v4.8.200 build 3.2.0.136, with label 'HCA.LionCub.A0'
Secondary image is v4.7.400 build 3.2.0.118, with label 'HCA.LionCub.A0'
Vital Product Data
The firmware that runs on the HCA appears in the Primary image line displayed in
also appears in this line as one of the following:
•
•
•
•
•
•
The ASIC version appears as A1 or A0.
OL-12309-01
Viewing Card Type and Firmware Version, page 8-3
Upgrading Firmware, page 8-4
Product Name: Lion cub
P/N: 99-00026-01
E/C: Rev: B03
S/N: TS0520X01634
Freq/Power: PW=10W;PCIe 8X
Date Code: 0520
Checksum: Ok
PCI-X Cougar
PCI-X Cougar Cub
PCI-e Lion Cub
PCI-e Lion Mini
PCI-e Cheetah
PCI-e CheetahDDR
Cisco SFS InfiniBand Host Drivers User Guide for Linux
tvflash Utility
Chapter 2, "Installing
Step
2. The card type
8-3
Advertisement
Table of Contents
