Cisco 8800 Hardware Installation Manual page 16

Documentation
Table 5 User Guides and Release Notes for Cisco Multiservice Switch Products (continued)
Document Title
Cisco MGX 8850 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811223=
Cisco MGX 8850 Multiservice Switch Overview, Release 1.1.3
OL-1154-01
Cisco MGX and Service Expansion Shelf Error Messages,
Release 5.0
OL-6485-01
Cisco MGX Route Processor Module (RPM-XF) Installation
and Configuration Guide, Release 5.2
OL-6954-01
Cisco MGX Route Processor Module (RPM-PR) Installation
and Configuration Guide, Release 5.2
OL-7349-01
Cisco PNNI Network Planning Guide for MGX and SES
Products
OL-3847-01
Cisco Service Expansion Shelf Hardware Installation Guide,
Release 1
DOC-786122=
Cisco SES PNNI Controller Command Reference, Release 3
DOC-7814260=
Cisco SES PNNI Controller Software Configuration Guide,
Release 3
DOC-7814258=
Cisco Voice Interworking Services (VISM) Configuration
Guide and Command Reference, Release 3.3
OL-5358-01
Cisco MGX 8800/8900 Series Hardware Installation Guide
xlviii
Description
Provides installation instructions for the Cisco MGX 8850
(PXM1) edge concentrator.
Describes the system components and function of the
Cisco MGX 8850 (PXM1) edge concentrator.
Provides error message descriptions and recovery
procedures.
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850
(PXM45), Cisco MGX 8880 (PXM45), and Cisco MGX 8950
switch. Also provides site preparation procedures,
troubleshooting procedures, maintenance procedures, cable
and connector specifications, and basic Cisco IOS
configuration information.
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM/B or RPM-PR) in the
Cisco MGX 8850 (PXM1), the Cisco MGX 8250, and the
Cisco MGX 8230 edge concentrators. Also provides site
preparation procedures, troubleshooting procedures,
maintenance procedures, cable and connector specifications,
and basic Cisco IOS configuration information.
Provides guidelines for planning a PNNI network that uses
Cisco MGX 8830, Cisco MGX 8850 (PXM45 and PXM1E),
Cisco MGX 8950, or Cisco BPX 8600 switches or the
MGX 8880 Media Gateway. When connected to a PNNI
network, each Cisco BPX 8600 Series switch requires an SES
for PNNI route processing.
Provides instructions for installing and maintaining an SES
controller.
Describes the commands used to configure and operate the
SES PNNI controller.
Describes how to configure, operate, and maintain the SES
PNNI controller.
Describes how to install and configure the Voice
Interworking Service Module (VISM) in the Cisco
MGX 8830, Cisco MGX 8850 (PXM45), and Cisco MGX
8850 (PXM1E) multiservice switches. Provides site
preparation procedures, troubleshooting procedures,
maintenance procedures, cable and connector specifications,
and Cisco CLI configuration information.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006