Cisco 8800 Hardware Installation Manual page 14

Documentation
Table 5 User Guides and Release Notes for Cisco Multiservice Switch Products
Document Title
Cisco ATM and Frame Relay Services (MPSM-T3E3-155 and
MPSM-16-T1E1) Configuration Guide and Command
Reference for MGX Switches, Release 5.2
OL-6487-01
Cisco ATM Services (AUSM/MPSM-8-T1E1) Configuration
Guide and Command Reference for MGX Switches, Release
5.2
OL-6479-01
Cisco ATM Services (AXSM) Configuration Guide and
Command Reference for MGX Switches, Release 5.2
OL-4548-01
Cisco Circuit Emulation Services (CESM/MPSM-8-T1E1)
Configuration Guide and Command Reference for MGX
Switches, Release 5.2
OL-6481-01
Cisco Frame Relay Services (FRSM/MPSM-8-T1E1)
Configuration Guide and Command Reference for MGX
Switches, Release 5.2
OL-6480-01
Cisco MGX 8230 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811215=
Cisco MGX 8230 Edge Concentrator Overview, Release 1.1.3
DOC-7812899=
Cisco MGX 8230 Multiservice Gateway Command Reference,
Release 1.1.3
DOC-7811211=
Cisco MGX 8230 Multiservice Gateway Error Messages,
Release 1.1.3
DOC-78112113=
Cisco MGX 8250 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811217=
Cisco MGX 8800/8900 Series Hardware Installation Guide
xlvi
Description
Provides software configuration procedures for provisioning
ATM and Frame Relay connections on the new
MPSM-T3E3-155 multiprotocol service module. Also
describes all MPSM-T3E3-155 commands.
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also describes all AUSM commands. Includes
software configuration procedures for provisioning
connections and managing the MPSM-8-T1E1 card as an
AUSM card replacement.
Explains how to configure the AXSM cards and provides a
command reference that describes the AXSM commands in
detail. The AXSM cards covered in this guide are the
AXSM-XG, AXSM/A, AXSM/B, AXSM-E, and
AXSM-32-T1E1-E.
Provides software configuration procedures for provisioning
connections and managing the Circuit Emulation Service
Module (CESM) cards supported in this release. Also
describes all CESM commands. Includes software
configuration procedures for provisioning connections and
managing the MPSM-8-T1E1 card as a CESM card
replacement.
Provides software configuration procedures for provisioning
connections and managing the Frame Relay Service Module
(FRSM) cards supported in this release. Also describes all
FRSM commands. Includes software configuration
procedures for provisioning connections and managing the
MPSM-8-T1E1 card as an FRSM card replacement.
Provides installation instructions for the Cisco MGX 8230
edge concentrator.
Describes the system components and function of the
Cisco MGX 8250 edge concentrator.
Provides detailed information on the general command line
interface commands.
Provides error message descriptions and recovery
procedures.
Provides installation instructions for the Cisco MGX 8250
edge concentrator.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006