Application Recovery - HP Pavilion a210 Quick Start Manual

Application Recovery

Note:
Not all models include the Application
Recovery program. Perform steps 3 through 7 of
the following procedure. If HP Application
Recovery appears in the folder, your PC includes
the program.
If an individual factory-installed application or
driver accidentally gets erased or damaged, you
can reinstall the software using the
HP Application Recovery program.
Note:
Do not use the Application Recovery program to
reinstall software programs that came on CDs or
DVDs included in the PC box. Reinstall these
programs directly from the CDs or DVDs.
To start Application Recovery:
1 Close all applications and folders.
2 Uninstall the existing (damaged) application;
see "Uninstalling programs" on page 111.
3 Click Start on the taskbar.
4 Choose All Programs.
5 Choose Hewlett-Packard.
6 Choose HP Pavilion PC Tools.
7 Click HP Application Recovery.
8 Click Application Installation or
Driver Installation, and then click Next.
9 Select the driver or application program to
install, and then click Install.
10 Follow the onscreen instructions.
11 Repeat steps 8 through 10 to install other
drivers or applications.
12 When you have finished recovering
applications or drivers, close the Application
Recovery program. Then click Start, click
Turn Off Computer, and click Restart to
restart the PC.
Warning:
Do not skip this last step!
You must restart the PC when you are
finished recovering applications or
drivers.
103
Quick Start Guide