To Connect Your Multi-Channel Speaker System To The Pc; To Configure Multi-Channel Audio Output For Speakers Configuration - HP Pavilion a210 Quick Start Manual

To connect your multi-channel
speaker system to the PC
1 Turn off the PC.
2 Connect the three audio cable plugs from the
speaker system to the connectors on the back
of the PC (see following table).
Connect speaker
plugs for 6/5.1
speaker mode
Front speakers
Rear speakers
Centre/subwoofer
speakers
3 Turn on the PC.
4 Turn on your speaker system.
5 Configure the multi-channel audio output;
refer to the next procedure.
32
HP Pavilion home PC
To PC back
connector
Audio (Line) Out
(lime-green)
Audio (Line) In (blue)
Mic-1 (pink)
To configure multi-channel audio
output for speakers configuration
1 Click Start on the taskbar.
2 Choose All Programs.
3 Click Multi-channel Sound Manager and
then click Multi-channel Sound Manager
again. The Multi-channel Audio Configuration
window opens.
Note:
If you do not see the Speaker Configuration tab,
your PC does not have the multi-channel
capability.
4 Click the Speaker Configuration tab.
5 Select the option describing the number
of speakers in your system, for example,
6/5.1 speaker mode. You can click the
Speaker Test tab, and then click a speaker
icon to test it.
6 Click OK.