Table of Contents
Advertisement
Problem
Solution
The mouse doesn't
3
work, even though
everything else does.
3
3
Non system disk error
3
Invalid Media error
3
If nothing happens when you move the mouse, it's possible that the mouse is
connected improperly.
USB mouse only: Make sure the mouse is firmly connected to the USB port. Try
unplugging and replugging the mouse.
Non-USB mouse only: Make sure the mouse is connected to the mouse port, not
to the keyboard port. To reconnect these two cables, turn the computer off, reconnect
the cables, and then turn the computer back on.
If the pointer doesn't move on the screen when you move the mouse, clean the mouse.
For an optical mouse, wipe the light sensor lens on the bottom of the mouse with a
lint-free cloth. For a roller ball mouse:
1 Remove the mouse ball by unscrewing the bottom of the mouse.
2 Clean the mouse ball with a damp cloth (not paper).
3 Use your finger to move the rollers in the mouse ball housing, and remove lint
and dust.
4 Replace the mouse ball, and screw on the cover.
The computer might have stopped. Reset the computer by pressing and holding the
computer On button until the computer turns off (approximately five seconds). Then
turn the computer back on.
The PC is trying to start the operating system from the diskette drive. Press the Eject
button and remove the diskette from the drive.
The PC is trying to start the operating system from the CD-Writer Plus drive. Press the
Eject button immediately after turning on the PC and remove the CD from the drive.
63
Quick Start Guide
Advertisement
Table of Contents
