Hibernation Mode - HP Pavilion 525 Quick Start Manual

Hibernation mode

When the PC is in hibernation mode, it saves
everything that is in PC memory to the hard disk,
turns off the monitor and the hard disk, and
then turns itself off. When you turn on the PC,
everything (programs, folders, and documents)
is restored to the screen.
To manually put the PC into hibernation:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Press and hold down the Shift key on the
keyboard, and click Hibernate.
Note:
If Hibernate is not present, you first need
to set up your PC for hibernation; refer to
steps 1 through 6 of "Automatic standby or
hibernation mode" on page 40.
4 When you want to use the PC again after
hibernation, press the On button on the front
of the PC.
If the PC does not work properly when you
wake it from hibernation, restart the PC:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Restart.
39
Quick Start Guide