Safety Precautions - procontrol IP Stecker User And Installation Manual

Safety Precautions

Please read this guide before installing
and using the device. Please use the
device properly and as described in the
following manual.
The authors are NOT liable for any claim,
damages or other liability out of:
using not the proper way
incorrect installation
connecting to inappropriate electronic
network
incorrect maintenance
not approved modifications, interventions
using non-original elements
Do not attempt to disassemble or modify
any part of this product.
Do not store at temperatures outside the
specified range and do not operate in an
environment outside the specified range
as it will reduce the life of the product or
cause product malfunction.
Maximum number of connectable devices
using switching power supply is 2/socket!
Never allow water or any other foreign
matter to get into the unit. The unit
contains sensitive electronic parts, so
water and foreign matter not only can
cause malfunction, they also create the
risk of overheating due to short circuiting
and insulation failure, fire and smoke,
combustion, and electric shock. Ne
helyezze a terméket hőforrás közelébe,
illetve ne tegye ki az eszközt közvetlen
láng vagy hő hatásának, mivel az eszköz
olyankor felrobbanhat.
Only use the product for it's intended
purpose!
Safety
Keep the device in operation only from
electric sources defined in this user
manual. Do not open the device, there are
no user serviceable parts inside!
Attention! Connect the product exclusively
to a grounded power outlet with relay
contact protection network.
To avoid fire and risk of electronic shock:
Beware that your children do not throw or
push objects through the slots of the
device.
Do not mount accessories or attachments
on the device that are not designed for
this device. If you do not use the device
for longer time or in case of lightning, you
shall unplug the power cord.
Risks at Installation
Do not store anything on the power cord.
Do not place the device, where the power
cord can be damaged. Do not use the
device under wet circumstances or in
humid premises.
Cleaning
Switch off the device before cleaning. Use
slightly wet mop. Excessive humidity may
cause electric shock
General rights and responsibility
Manufacturing rights of this device are
reserved by Procontrol Electronics Ltd.
Modifying or copying of this device or
parts is prohibited!
Procontrol Ltd. is not liable for using of this
device and the consequences of the
application.