Table of Contents
Advertisement
8. Save settings – Saving settings of plugs
In this section the states of each plug can be set after a device restart or switching off. In the
New settings column "Unchanged" leaves the plug in the current state, the "On" or "Off"
changes the mode currently set. Currently stored state is displayed in the Current state
column. During a power failure, or a blackout the IP Stecker's non-volatile memory
"remembers" the latest switching states and settings and re-establishes them when the
power supply is restored. So the IP Stecker operates unchanged until you give a new
command. This function can be turned off.
Advertisement
Table of Contents
