Table of Contents
Advertisement
3. Command line remote control through user developed
program (SDK)
Remote control of the IPstecker through command prompt is also possible by downloading a
utility software (Perlscript), which is available free of charge from www.activeperl.com.
Perl script usage:
1. Install Perl interpreter to the computer. (interpreter / motor / engine)
2. Start the command line script: stecker.pl [IP address][settings]
The script can be accessed from a webpage or from a unique program
The following parameters can be specified for the script:
Pass:
You can enter a login password
plg<x>: You can switch off and on the hook. Value Range: 0.1
Eg: stecker.pl 192.168.2.25 Pass=admin plg1=1 plg2=0 plg3=1
(this sample command switches on plug 1 and 3, and switches off plug 2.)
4. Command line control through USB connection
IPStecker is accessible not exclusively through Ethernet but it is connectible to your PC also
through USB A-B wire and enables you to switch the sockets on a command line interface.
When you attach the device to your computer the first time, a dialogue box appear which
guides you through the steps of driver setup. Once you click on „Not now" option you are
enabled to give the path of the driver.
(The window below appears in the default language of Setup Wizard on your PC.)
Advertisement
Table of Contents
