Table of Contents
Advertisement
9. Ping settings – Automatic plug restart (automatic restart of crashed
systems e.g., RESET)
With this function any number of operations checking signal can be sent out at any time to
devices connected to the network. A device crash or a network failure is easily detectable
with this method, and the malfunctioning device connected to the specific plug can be
restarted.
The pinger pings a given IP address at specified time intervals, and if there is no answer after
5 times, the appropriate plug will be switched off and after 5 seconds on again.
10. System – Language settings and device restart/logout
Language of the web interface can be set to Hungarian or English.
Advertisement
Table of Contents
